Automotive Spray

Approx. Rs 230 / PieceGet Latest Price

Product BrochureProduct Details:

Product description:

Omni Spray TC 20 is an effective multipurpose product for quick and general maintenance of machines and equipments. This is specially formulated to perform wide range of maintenance tasks. It has low surface tension and wets metal surfaces including microscopic irregularities. Its water displacing properties protect electrical equipments from short circuits.

Applications:

Due to its good adhesive properties to metallic surfaces, it provides corrosion protection & provides light lubrication to moving parts, contacts etc. Due to its high penetrating and spreading properties, it penetrates rapidly and loosens rusted nuts and bolts, fanges etc, thus facilitating disassembly. It has good cleaning and degreasing properties. Its water displacement properties prevent malfunctions and breakdowns by sealing against moisture in electrical applications.

Advantages:

• Displaces moisture
• Offers short term corrosion protection 
• Loosens the rust & releases rusted bolts & nuts 

Handling instructions: 

Shake the can well. Keep away from open flame & heat. Do not store above 500C .Contents under pressure. Highly flammable material. Check for compatibility before use. Refer MSDS for more information about safe use, physical & health hazards. 

Approx. Rs 494 / PieceGet Latest Price

Product BrochureProduct Details:

Description:

Fully synthetic adhesive lubricant for the lubrication of fast-running chains and machine elements indoors and outdoors that are subjected to high loads or corrosive influences.

Applications:

• Driving and conveyor chains of all designs in open or semienclosed operation without a re-lubrication device
• Roller chains such as motorcycle and bicycle chains 
• Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device 
• Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways 
• Flexible drives, bowden and spring cables 
• Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces 

Advantages and benefits: 

• Highly effective due to outstanding creep and gap penetration properties 
• Highly adhesive and resistant to throwing off 
• Contains Mo???-Active for increased performance 
• Excellent wear protection 
• Very good resistance to cold and hot water as well as to saline solutions 
• Excellent corrosion protection 
• O-ring neutral 

Branches: 

• Logistics 
• Plant and machine (tool) engineering 
• Rubber and plastic processing 
• Rail vehicle technology 
• Paper and packaging industry 
• Glass and foundry industry 
• Iron and steel industry 
• Shipbuilding and marine technology 
• Municipal services 
• Chemical industry

Application Tips:

For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 450 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 451 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions, avoid excessive lubrication. Caution: Only mix with suitable lubricants

Approx. Rs 320 / PieceGet Latest Price

Product BrochureProduct Details:

Product description:

Belt Maintenance Spray TC 77 is suitable for dressing of all types of industrial and V belts and rubbers. Increases tensile force for all kinds of V belts, round and flat belts on fans, compressors & pumps.

Applications:

Belt Maintenance Spray TC 77 is used for dressing of all types of industrial and V belts. Once applied it gives belts extra adhesion and improving both torque and power by elimination of slip.

Advantages

• Colourless sticky film
• Repels moisture
• Increases service life
• Prevents slip
• Increases belt tension force 

Handling instructions: 

Shake the can well. Keep away from open flame & heat. Do not store above 500C .Contents under pressure. Highly flammable material. Check for compatibility before use. Refer MSDS for more information about safe use, physical & health hazards.

Approx. Rs 88 / PieceGet Latest Price

Product BrochureProduct Details:

Approx. Rs 230 / PieceGet Latest Price

Product Details:

Approx. Rs 780 / PieceGet Latest Price

Product BrochureProduct Details:

Approx. Rs 360 / PieceGet Latest Price

Product Details:

Approx. Rs 380 / NumberGet Latest Price

Product Details:

Approx. Rs 1,550 / LtrGet Latest Price

Product Details:

Approx. Rs 340 / PieceGet Latest Price

Product BrochureProduct Details:

Description:

Multi-functional fluid spray for dismantling, lubrication and care of machine elements and metal surfaces.  

Applications:

Dismantling of all seized or sticky components or machine elements like 

• Door locks
• Hinges
• Bolts
• Bushings

Approx. Rs 370 / PieceGet Latest Price

Product BrochureProduct Details:

Product description:

Anti-Corrosion Wax Coating Spray TC 72 is designed to protect the metals from corrosion in hostile conditions. TC 72 forms a dry waxy film for the protection of tools, moulds and machines & it gives a multi metal protection.

Applications:
An anti-corrosion wax coating spray for the protection of finely machined metal surfaces such as tools, dies, moulds, spares, machines, etc.

Advantages:

• Clean, tack-free corrosion protection
• Quick drying, waxy film protects up to 6 months under indoor conditions 
• Excellent oil and moisture resistance 
• No removal of protective film prior to operation necessary as compatible with lubricants. 
• It has the ability to displace moisture from the surface of most metals
• The waxy coating is easily cleanable with ordinary solvents. 

Handling instructions:

Shake the can well till movement of ball inside the can is audible. Keep away from open flame & heat. Do not store above 500 C .Contents under pressure. Highly flammable material. Check for compatibility before use. Refer MSDS for more information about safe use, physical & health hazards. 

Approx. Rs 374 / PieceGet Latest Price

Product BrochureProduct Details:

Description:

Temporary wax-based corrosion protection film for preservation of machine parts with bare metal surfaces during storage and shipping. For bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (industrial atmosphere, tropics, and ocean). 

Applications:

To protect finely machined metal surfaces such as tools, dies, moulds including Plastic injection moulds, spare parts, machines etc., against corrosion during storage and transport, even under industrial atmosphere, tropical climate and marine conditions.

Ideal stand by and storage protection for spare parts with possibility of direction installation. Easily removable coating (e.g. with OKS 2600 / OKS 2601).

Application Tips:

For best results clean the surface, first mechanically and then with OKS 2600/OKS 2601. Spray a thin layer onto the dry and clean areas. Avoid excess application. Compatible to most oil based lubricants, it is not necessary to remove the film before use. Take care of manufacturers advices. For additional questions please contact our Technical Department.

Shake the container well before use. The product can be applied on thoroughly cleaned surface by spraying. Close the container lid securely after use. Since the propellant is highly inflammable the can should be stored below + 50°C and away from heat sources.

Advantages and benefits:

• The film is very thin, colorless and dry. On request, the product can also be delivered in blue colour. 
• Highly effective due to good film-forming properties. Excellent suited for producing dry to the touch, clean protective films.
• Outstanding corrosion and oxidation protection with lubricating effect.
• No degreasing prior to commissioning, as compatible with all lubricants. 
• Waterproof and resistant to weathering. Suitable for all climate zones. 
• The product does not harm rubber and plastic
• Free from Chlorinated solvents Good compatibility with lubricants. 

Approx. Rs 380 / PieceGet Latest Price

Product BrochureProduct Details:

Description:

Residue-free evaporating universal cleaner for cleaning machine parts and material surfaces.
 
Applications:

• Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers
• Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants 
• Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) 
• Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants

Branches:

• Plant and machine (tool) engineering
• Logistics
• Iron and steel industry
• Maintenance and servicing
• Paper and packaging industry 
• Shipbuilding and marine technology
• Rubber and plastic processing
• Rail vehicle technology 
• Glass and foundry industry
• Municipal services 
• Chemical industry   

Advantages and benefits: 

• Modern active cleaner on the basis of a solvent mixture 
• Highly effective due to actively cleaning substances
• Better initial dissolving of soiling than at brake cleaners thanks to longer soaking-in period  
• No formation of condensate on the material surface
• OKS 2610 is suitable for use with the OKS Airspray system

Application tips: 

Wetting of the surfaces to be cleaned to excess. Cleaning is made even more effective if you simultaneously rub away at the surface with paper or cellulose cloths. If necessary, repeat the process at stubborn soiling. Small parts can be cleaned immersed using a brush. Subsequently allow to dry completely at room temperature. Dab away running cleaner with absorbent material and allow to evaporate in open air. Use only in well-ventilated rooms or in the open air. Some types of plastic or rubber (e.g. thermoplastics such as PVC, plexiglass, polystyrene) and paints could be attacked. We recommend therefore that you check the resistance before use.

Approx. Rs 250 / PieceGet Latest Price

Product BrochureProduct Details:

Salient Features:

• Superior penetration
• Excellent lubrication and corrosion protection of chain
• Highly adhesive to metal surfaces
• Higher thermal stability 

Description:

Chain Lubricant will not wash off even in the wettest conditions and it contains antirust agents to protect chains. An effective adhesive chain lubricant for lubrication and corrosion protection of industrial chains, wire ropes, cables, pulleys, gear drives etc. A specially formulated to give optimum lubrication and corrosion protection to chains working under hostile conditions.

Approx. Rs 400 / BOTTLEGet Latest Price

Product BrochureProduct Details:

Product description:

Red Insulating Varnish Spray TC 80 is an effective fast drying product for protection of all electrical and electronic components. A tough flexible coating that protects and insulates exposed wire, components and electrical windings.

Applications:

TC 80 is used for the protection of electrical connections, switches, terminal boards, and motor windings from humidity, fungus and corrosion.

Advantages:

• Enhances electrical equipment life spans, prevents failures breakdowns
• High dielectric strength
• Excellent oil and moisture resistance
• Class B, flexible, tough, high dielectric strength arc & tracking resistant finishing electrical varnish. 
• Penetrates, coats, insulates & seals in one step
• Excellent finish – tough, flexible, glossy, and durable red coat.

Handling instructions:
Shake the can well till movement of ball inside the can is audible. Keep away from open flame & heat. Do not store above 500C .Contents under pressure. Highly flammable material. Check for compatibility before use. Refer MSDS for more information about safe use, physical & health hazards. 

Approx. Rs 320 / PieceGet Latest Price

Product BrochureProduct Details:

For the corrosion protection of molulds
Highly effective due to good film-forming properties
Waterproof and resistant to weathering

Approx. Rs 230 / pieceGet Latest Price

Product Details:

Approx. Rs 250 / PieceGet Latest Price

Product Details:

• Clean and protects
• Loosen Rusted Parts
• Stops Squeaks 

Approx. Rs 85 / PieceGet Latest Price

Product Details:

Approx. Rs 290 / pieceGet Latest Price

Product Details:

Approx. Rs 340 / PieceGet Latest Price

Product Details:

Approx. Rs 360 / PieceGet Latest Price

Product Details:

Approx. Rs 340 / PieceGet Latest Price

Product Details:

Approx. Rs 330 / PieceGet Latest Price

Product Details: